In the event you’ve purchased an IKEA Pax wardrobe and are on the lookout for concepts or tips about how one can make them look just a little extra customized and costly, look no additional than including customized trim to your wardrobe doorways!
Including trim is a fast strategy to take a set of Pax wardrobes from wanting inventory to stylish, and you may customise your doorways to suit your dwelling’s persona.
Love a very good IKEA hack? Try:

Provides:
–drill
–painter’s tape
–degree
–14″ wood circle
-straight half spherical molding (I did a 3/8″ x 3/4″ measurement moulding)
-half spherical versatile molding (I did this 3/8″x 3/4″ measurement versatile moulding)
–miter noticed or hand noticed and a miter field
–craft noticed
–end nail gun (I really like that battery one however this one is a bit more funds pleasant) and three/4″ brad nails
–wooden filler and nice sandpaper
–caulk
-paint primer (use this one so that you don’t must sand the laminate doorways first)
-acrylic paint (with a spindle brush should you can as they’re tremendous useful for portray moulding)
*Be aware: I like this website loads for versatile moulding, as they’ve plenty of sizes and you may get it pre-bent right into a circle, which is admittedly useful because the materials may be robust to bend from straight.
In the event you get confused on tips on how to order it, they’re actually useful over the cellphone.

The sort of door model works greatest with a single knob to your door {hardware}, and it’s often positioned in the course of the door. So add your {hardware} first so you may construct round it. Knobs like this work nice!

Now, we’ll need to use our wood circle for our arch information. Drill a gap in the course of your circle that’s the identical measurement as your door deal with screw, so you may take the door deal with off and sort of hold the circle on the screw. Use some painter’s tape to maintain it from rotating.
Drape the beginning of your versatile trim excessive of the circle (you may tape it in place if you wish to) and line up and tape your first straight trim piece for the highest left aspect.
It ought to be 3.5″ in from the sting of the door and the top of the trim wants to hold all the best way down to only contact the wood circle.

Now that your straight and flex trim are lined up on the circle, mark a straight line with a pen or pencil the place the straight trim hits the highest of your flex molding, all the best way right down to the place it hits your wood circle. Now you’ve got your angle to chop!


Once I went to chop the straight trim on my miter noticed, I spotted fairly rapidly that the angle I wanted to chop was better than 45°, which is the max angle for many miter saws. Luckily, there’s a trick to get your noticed to chop greater than 45° (which you’ll be able to absolutely see on this video).
However, you mainly clamp or glue a scrap piece of wooden onto your noticed, make a forty five° minimize, after which hold that minimize board clamped in place such as you see above and you utilize that as your new information.
Once I rotated my noticed angle again in direction of the center to the 25° mark, that gave me a 70° angle (45° + 25° = 70°) which lined up with the angle I had drawn and that’s how I discovered what angle I wanted to chop.
To chop the reverse angle for the opposite aspect, you may both minimize one other 45° to mount to the opposite aspect of your noticed and reverse the method, or you may flip the trim the wrong way up and it’ll minimize a mirror angle.
Need a tremendous easy (no energy noticed) strategy to do it? All you must do is use a hand noticed to eyeball it and noticed straight throughout the road you drew one of the best you may.
Will or not it’s excellent? No, however it is going to be fairly shut and you should utilize wooden filler to fill in any areas the place it didn’t completely line up.

Now that you’ve got your deep angles minimize in your straight sides, tape them again in place whereas your versatile trim remains to be draped over your circle and mark with a pen/pencil the place the straight trim overlaps the flex trim (so you understand the place to chop your flex trim).
It’s potential to chop flex moulding on a miter noticed, however from expertise, I’d solely try this with straight items. Typically, you should purchase them pre-bent like I did, which makes dealing with them across the circle simpler.
Minimize it very slowly and thoroughly—it tends to maneuver or bounce again because it’s sort of a rubbery materials.
Total, I’d suggest shopping for items pre-bent like mine and utilizing a craft or hand noticed to make the minimize because it’s such a steep angle and that materials is finicky with a miter noticed. Simply eyeball the road you made and noticed via it to make the minimize.
You may as well use a heavy obligation X-Acto knife and make plenty of cuts, however watch out to not minimize your self because the materials is relatively dense.

As soon as your flex moulding is minimize, you may put your puzzle items collectively as proven to verify they match! Now repeat for the underside part of trim.

As soon as you might be proud of that, you may minimize the peak of your straight items to additionally hit 3.5″ from the highest and backside of the door at mirroring 45° angles so you may add a smaller piece of straight trim to attach them.

Repeat the method with every of your doorways—you should utilize the items you already minimize as a template to make it go loads quicker).
As soon as they’re taped in place and also you be certain that they’re all degree with the door edges, use a end nail gun to connect the trim to the door. You may as well put down just a little wooden glue first between the trim and door if you need for further maintain.

As soon as your trim is connected, it’s time to fill any nail holes with wooden filler and sand easy when dry, caulk the place the trim meets the door for a seamless look, and paint the doorways so all of it matches.
You may as well use the wooden crammed to fill any gaps the place your trim didn’t line up completely, and that helps all of it seem like one unit as nicely.
Because the IKEA doorways are laminate, you’ll need to use this primer earlier than you paint. It’ll assist the precise paint follow the laminate, and also you received’t must sand the doorways earlier than portray.
I used Melting Icicles by Behr to match the white that IKEA furnishings is available in, and it’s a extremely nice match to your ultimate coats of paint. I used a spindle brush for the trim components and a small curler for the flat areas.
As soon as your paint is dry, your personalized IKEA Pax cupboards are able to fill and use!



I actually really feel like including the trim to the doorways brings the entire wardrobe as much as one other degree. It makes it look so customized and luxe and I completely adore it.
You’ll be able to customise your trim to be no matter form you need, however this Parisian really feel suits my dwelling completely. If you’re about so as to add an IKEA Pax wardrobe to your house, do that customized trim concept to make it just a little extra stylish and I feel you’ll be so glad you probably did. xo Laura
For extra door concepts, try:
Tricks to Customise an IKEA Pax Wardrobe
Customise IKEA Pax Wardrobes with Wood Trim!
- painter’s tape
- 14″ wood circle
- straight half spherical molding I did a 3/8″ x 3/4″ measurement moulding
- half spherical versatile molding I did this 3/8″x 3/4″ measurement versatile moulding
- ¾” 18 gauge brad nails
- wooden filler and nice sandpaper
- caulk
- paint primer use Zinsser 1, 2, 3
- acrylic paint use a spindle brush
-
First, we’ll need to use our wood circle for our arch information. Drill a gap in the course of your circle that’s the similar measurement as your door deal with screw so that you could take the door deal with off and sort of hold the circle on the screw. Use some painter’s tape to maintain it from rotating.Drape the beginning of your versatile trim excessive of the circle (you may tape it in place if you wish to) and line up and tape your first straight trim piece for the highest left aspect in order that it’s 3.5″ in from the sting of the door and the top of the trim hangs all the best way down to only contact the wood circle.
-
Now that your straight and flex trim are lined up on the circle, mark a straight line with a pen or pencil from the place the straight trim hits the highest of your flex molding all the best way right down to the place it hits your wood circle. Now you’ve got your angle to chop!
-
Once I went to chop the straight trim on my miter noticed I spotted fairly rapidly that the angle I wanted to chop was better than 45°, which is the max angle for many miter saws. Luckily, there’s a trick to get your noticed to chop greater than 45° (which you’ll be able to absolutely see on this video), however you mainly clamp or glue a scrap piece of wooden onto your noticed, make a forty five° minimize, after which hold that minimize board clamped in place such as you see above and you utilize that as your new information. Once I rotated my noticed angle again in direction of the center to the 25° mark, that gave me a 70° angle (45° + 25° = 70°) which lined up with the angle I had drawn and that’s how I discovered what angle I wanted to chop.
-
To chop the reverse angle for the opposite aspect, you may both minimize one other 45° to mount to the opposite aspect of your noticed and reverse the method, or you may flip the trim the wrong way up and it’ll minimize a mirror angle.Need a tremendous easy (no energy noticed) strategy to do it? All you must do is use a hand noticed to eyeball it and noticed straight throughout the road you drew one of the best you may. Will or not it’s excellent? No, however it is going to be fairly shut and you should utilize wooden filler to fill in any areas the place it didn’t completely line up.
-
Now that you’ve got your deep angles minimize in your straight sides, tape them again in place whereas your versatile trim remains to be draped over your circle and mark with a pen/pencil the place the straight trim overlaps the flex trim so you understand the place to chop your flex trim.It’s potential to chop flex moulding on a miter noticed, however from expertise I’d solely try this with straight items (typically you should purchase them pre-bent like I did which makes dealing with them across the circle easer) and minimize it very slowly and thoroughly—it tends to maneuver or bounce again because it’s sort of a rubbery materials.Total, I’d suggest shopping for items pre-bent like mine and utilizing a craft or hand noticed to make the minimize because it’s such a steep angle and that materials is finicky with a miter noticed. Simply eyeball the road you made and noticed via it to make the minimize. You may as well use a heavy obligation X-Acto knife and make plenty of cuts, however watch out to not minimize your self because the materials is relatively dense.
-
As soon as your flex moulding is minimize, you may put your puzzle items collectively as proven to verify they match! Now repeat for the underside part of trim.
-
As soon as you might be proud of that, you may minimize the peak of your straight items to additionally hit 3.5″ from the highest and backside of the door at mirroring 45° angles so you may add a smaller piece of straight trim to attach them.
-
Repeat the method with every of your doorways (you should utilize the items you already minimize as a template to make it go loads quicker) and as soon as they’re taped in place and also you be certain that they’re all degree with the door edges, use a end nail gun to connect the trim to the door (you can too put down a little wooden glue first between the trim and door if you need for further maintain).
-
As soon as your trim is connected, it’s time to fill any nail holes with wooden filler and sand easy when dry, caulk the place the trim meets the door for a seamless look, and paint the doorways so all of it matches. You may as well use the wooden crammed to fill any gaps the place your trim didn’t line up completely and that helps all of it seem like one unit as nicely.Because the IKEA doorways are laminate, you’ll need to use this primer earlier than you paint. It’ll assist the precise paint follow the laminate and also you received’t must sand the doorways earlier than portray. I take advantage of Melting Icicle by Behr to match the white that IKEA furnishings is available in and it’s a extremely nice match to your ultimate coats of paint. I take advantage of a spindle brush for the trim components after which a small curler for the flat areas.As soon as your paint is dry, your personalized IKEA Pax cupboards are able to fill and use!
GIPHY App Key not set. Please check settings